The CAMPKO gas cylinder holder is suitable for mounting conventional interchangeable gas cylinders, refillable aluminum gas cylinders and CAMPKO refillable gas cylinders.
The CAMPKO gas cylinder holder is suitable for mounting conventional interchangeable gas cylinders, refillable aluminum gas cylinders and CAMPKO refillable gas cylinders. The gas cylinder holder is predestined for the permanent installation of refillable gas cylinders in motorhomes, caravans or motorhomes, but can also be used for industrial purposes or for attaching gas cylinders in the leisure sector.
The mounting plate and the tensioning straps are made of high-quality stainless steel with rubberized edges. The tensioning straps are also rubberized.
The extensions open and close with two hexagon-head screws, so that the gas cylinder can be quickly removed at any time.
When permanently installed in the motorhome, the gas cylinder holder is screwed firmly to the rear or side wall of the gas cabinet. For greater stability, we recommend connecting it to the vehicle body or using a counter plate (not included in the package) on the rear wall of the gas cabinet.
Safety information and warnings:
The CAMPKO gas cylinder holder was specially developed for the secure fixation of refillable gas cylinders in vehicles or stationary gas storage facilities. The product complies with UN Regulation No. 67 and ensures safe use when installed correctly.
Scope of application: The gas cylinder holder is intended for use in vehicles or stationary areas to securely fix gas cylinders and facilitate transport.
WARNING: Failure to follow the safety instructions may result in serious personal injury or property damage.
Installation steps:
Determine the position of the gas cylinder in the gas storage facility or vehicle.
Mark the 4 fixing points using the bracket.
Drill the marked points with a 10 mm drill.
Secure the front plate of the bracket using the nuts and bolts provided.
Insert the straps through the holes provided in the bracket and secure them firmly.
Place the gas cylinder in the bracket and secure it with the straps.
Maintenance and inspection:
Regularly check the tightness and wear of the fasteners and straps.
Make sure there is no corrosion on the metal parts.
Clean the bracket regularly to remove dirt or deposits.
Be the first to review this product.
