Code: CK107940

Dekalin DEKAsyl MS 5 Polymer adhesive sealant 290 ml

82,18 lei
The price shown includes VAT.
Unavailable This Product is expected to be on stock again on January 2027

DEKAsyl MS-5 is a high-quality power adhesive with a high initial strength which can be used in all areas of vehicle construction. The areas of use and application are diverse and can be extended as required.

Color white
Delivery 24–48h — free over 299 lei (except specially marked products)
14-day returns · no questions asked

Description

Areas of application:

Bonding of, among others:

- Metal frames

- Corner profiles

- Structural bonding of polyester parts

- Climate boxes

- solar systems

- SAT systems

- Frames and wheel covers

- and much more

Proper application:

DEKAsyl MS-5 can be easily applied with a hand or air pressure gun. For sealing, Dekasyl MS-5 should be applied within 12 minutes (at 20°C/50 % rel. humidity) with a cloth previously dipped in a mild soap solution.

Dekasyl MS-5 should be further processed or smoothed with a spatula or putty knife previously dipped in a mild soap solution.

Avoid penetration of the side solution between the joint sides and the sealant, as this leads to a loss of adhesion.

this leads to a loss of adhesive strength. For bonding, the substrates must be dried within 15 minutes (at

20°C/50% rel. humidity) after application of Dekasyl MS-5. The higher the temperature

the shorter the processing time! In general, an adhesive layer of 2 mm is recommended if similar materials

materials (with similar strength) are to be bonded. The greater the difference in thermal expansion, the thicker the adhesive layer should be. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-5 can be applied with most industrial paints after just 10 minutes.

can be painted over with most industrial paints after just 10 minutes. The best possible adhesion of

The best possible adhesion of colour layers is achieved when the paint is applied 4 hours after application of Dekasyl MS-5. Clean the tools or remove uncured residues of Dekasyl MS-5 with a clean, colourless cloth soaked in acetone or MEK (it is recommended to check beforehand whether the surface is attacked by this cleaner).

Technical data:

  • Base material: MS Polymer

  • Curing/sealing: Moisture

  • Specific density: approx. 1.4 kg/litre

  • Skin formation time (20°C/50% rel. LF): approx. 12 minutes

  • Open time (20°C/50% rel. LF): < 15 minutes

  • Curing after 24 h (20°C/50% rel. LH): approx. 4 mm

  • Shore A hardness (DIN 53505): approx. 55

  • Volume change (DIN 52451): < 3%

  • Adhesive strength (physical rheometer MC100): approx. 700 Pa (measure of the maximum uncured adhesive quantity that can be applied per m² without running down)

  • Tensile stress (100%) (DIN 53504/ISO 37): approx. 1.7 MPa

  • Tensile stress at break (DIN 53504/ISO 37): approx. 2.8 MPa

  • Elongation at break (DIN 53504/ISO 27): approx. 210%

  • Shear stress (DIN 53283/ASTM D1002): approx. 2.5 MPa

  • Tear strength (DIN 53515/ISO 34): approx. 14 N/mm

  • Solvent content:0%

  • Isocyanate content:0%

  • Temperature resistance: -40°C to +120°C

  • Application temperature: +5°C to +35°C

  • UV and weather resistance: excellent

Reviews

Be the first to review this product.

Write a review

Reviews are published after moderation.

Similar products